DIR-632 Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Figure 117. The page for editing a group of ports for VLAN.
You can specify the following parameters:
Parameter Description
Main settings
Name A name for the port for easier identification.
Enable
Select the checkbox to allow using this group of ports.
Type
The type of the VLAN which identifier is specified in the VLAN ID
field.
Local. The group of this type is a channel used to connect local
clients to the router. It is mostly used to connect different types of
clients, which require separate connection settings.
NAT. The group of this type is an external connection with address
translation. It is mostly used to connect to the Internet. Later the
VLAN which identifier is specified in the VLAN ID field is used to
create a WAN connection (on the Net / WAN page).
Transparent. The group of this type is a transparent connection
between an internal port and an external connection. It is mostly
used to connect IPTV set-top boxes.
Page 148 of 197
To Next Page
Loading...
