108D-Link DIR-655 User Manual
Section 4 - Connect a Wireless Client to your Router
It is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an existing
network, you will need to know the WPA key being used.
2. Highlight the Wi-Fi network (SSID) you would like to connect to and click
Connect.
1. Open the Windows XP Wireless Utility by right-clicking on the wireless
computer icon in your system tray (lower-right corner of screen). Select View
Available Wireless Networks.
WPA/WPA2
To Next Page
Loading...
