D-Link DIR-655 - Network Filter

59D-Link DIR-655 User Manual
Section 3 - Conguration
Network Filter
Select Turn MAC Filtering O, Allow MAC addresses listed below, or Deny
MAC addresses listed below from the drop-down menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer to the Networking Basics
section in this manual.
Select a DHCP client from the drop-down menu and click << to copy that MAC
address.
Click to remove the MAC address.
Congure MAC
Filtering:
MAC Address:
DHCP Client:
Clear:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers, by their MAC addresses, from accessing the network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the router.