68D-Link DIR-655 User Manual
Section 3 - Conguration
Advanced Wireless
Set the transmit power of the antennas.
This enables 802.11d operation. 802.11d is a wireless specication
developed to allow implementation of wireless networks in countries
that cannot use the 802.11 standard. This feature should only be
enabled if you are in a country that requires it.
WMM is QoS for your wireless network. This will improve the quality
of video and voice applications for your wireless clients.
Check this box to reduce the guard interval time therefore increasing
the data capacity. However, it’s less reliable and may create higher
data loss.
Enable this option to reduce interference from other wireless networks
in your area. If the channel width is operating at 40MHz and there
is another wireless network’s channel over-lapping and causing
interference, the router will automatically change to 20MHz.
Transmit Power:
WLAN Partition:
WMM Enable:
Short GI:
HT20/40 Coexistence:
To Next Page
Loading...
