D-Link DIR-655 - Advanced Settings

50D-Link DIR-655 User Manual
Section 3 - Conguration
IPv6 in IPv4 Tunneling
Select IPv6 in IPv4 Tunnel from the drop-down menu.
Enter the settings supplied by your Internet provider (ISP).
Automatically obtain a DNS server address or enter a specic DNS
address.
Check to enable the DHCP-PD feature.
Enter the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Check to enable automatic IPv6 address assignment.
Check to enable automatic DHCP-PD in LAN.
Select Stateful (DHCPv6), SLAAC + RDNSS, or SLAAC + Stateless
DHCPv6.
Enter the start IPv6 address for the DHCPv6 range for your local
computers.
Enter the end IPv6 address for the DHCPv6 range for your local
computers.
Enter the router advertisement lifetime (in minutes).
My IPv6 Connection:
IPv6 in IPv4 Tunnel
Settings:
IPv6 DNS Settings:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable Automatic IPv6
Address Assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconguration
Type:
IPv6 Address Range
Start:
IPv6 Address Range
End:
Router Advertisement
Lifetime: