D-Link DIR-655 - Page 53

49D-Link DIR-655 User Manual
Section 3 - Conguration
Enable Automatic IPv6
Address Assignment:
Enable Automatic
DHCP-PD in LAN:
Autoconguration Type:
IPv6 Address Range Start:
IPv6 Address Range End:
IPv6 Address Lifetime:
Check to enable the autoconguration feature.
Check to enable automatic DHCP-PD in LAN.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6.
Enter the start IPv6 address for the DHCPv6 range for your
local computers.
Enter the end IPv6 address for the DHCPv6 range for your
local computers.
Enter the IPv6 address lifetime (in minutes).