D-Link DIR-825+ - System

115D-Link DIR-825+ User Manual
Section 3 - Conguration
System
SAVE AND RESTORE SETTINGSSYSTEM
DIR-825+
TOOLS
Click System on the navigation menu to congure the system settings. This section allows
you to manage the router’s conguration settings, reboot the router, and restore the router
to the factory default settings. Restoring the unit to the factory default settings will erase
all settings, including any rules that you’ve created.
Save Settings To
Local Hard Drive:
Use this option to save the current router conguration settings to
a le on the hard disk of the computer you are using. Click the Save
Conguration button. A le dialogue will appear, allowing you to
select a location and le name for the settings.
Load Settings From
Local Hard Drive:
Use this option to load previously saved router configuration
settings. Use the Choose File option to nd a previously saved le
of conguration settings and then click the Restore Conguration
From File to transfer those settings to the router.
Restore To Factory
Default Settings:
This option will restore all conguration settings back to the settings
that were in eect at the time the router was shipped from the factory.
Any settings that have not been saved will be lost, including any
rules that you have created. If you want to save the current router
conguration settings, use the Save button above.
Reboot The Device: Click this button to reboot the device.
Clear Language
Pack:
If the device is of other language than English, clicking this button
to convert the router’s language back to English.
SAVE AND RESTORE SETTINGS
SAVE AND RESTORE SETTINGS
Once the router is congured you can save the conguration settings to a conguration le on your hard drive. You also have the
option to load conguration settings, or restore the factory default settings.
SAVE AND RESTORE SETTINGS
Save Settings To Local Hard Drive : Save Conguration
Load Settings From Local Hard Drive : Choose File No le chosen
Restore Conguration From File
Restore To Factory Default Settings : Restore Factory Defaults
Reboot The Device :
Reboot the Device
Clear Language Pack : Clear