D-Link DIR-825+ - Repeater Mode

132D-Link DIR-825+ User Manual
Section 3 - Conguration
This section will show you how to congure or change the default settings your D-Link
DIR-825+ using the web-based conguration utility in Repeater Mode. Repeater Mode is
explained in Repeater Mode on page 10. The functions repeater mode are otherwise
identical to those described in router mode. This section lists only the dierences.
Repeater Mode
To access the conguration utility, open a web browser such as Internet Explorer and enter
http://dlinkrouter.local./ or you may also connect by typing the IP address of the router
(by default this is http://192.168.0.1 in router mode) in the address bar. In repeater mode,
the only reliable way to access the interface will be through the URL.
LOGIN
Login to the router :
User Name : Admin
Password :
Login
Enter your password. If you previously followed the setup wizard, please use the
admin password you entered during the wizard. Otherwise, leave the password blank.
Click Login to proceed.
Note: If you cannot remember your password and cannot log in, press the reset button on the
back of the device for longer than 10 seconds to restore the router to its default settings.
If you are having trouble logging in or experiencing trouble with the conguration utility,
try clearing your browser cache or try using your web browser’s private browsing mode.