D-Link DIR-825+ - Inbound Filter

95D-Link DIR-825+ User Manual
Section 3 - Conguration
Inbound Filter
INBOUND FILTERINBOUND FILTER
DIR-825+
ADVANCED
Click Inbound Filter on the navigation menu to congure the Inbound Filter. The Inbound
Filter allows you to place ltering rules on a per IP basis. Using this tool you may restrict
access to or block trac to a specic remote IP address or range. When you are satised
with your conguration, click Save Settings.
INBOUND FILTER
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can congure
inbound data ltering rules that control data based on an IP address range.
Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Save Settings Don’t Save Settings
INBOUND FILTER RULES LIST
Name Action Remote IP Range
ADD INBOUND FILTER RULE
Name :
Action : Allow
▼
Remote IP Range : Enable Remote IP Start Remote IP End
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
☐
0.0.0.0 255.255.255.255
Add Cancel
The currently dened Inbound Filter rules are listed here.
Click the Save Settings button when you are nished.
INBOUND FILTER RULES LIST
Name: Enter a name for this Inbound Filter.
Action: Allow or Deny trac.
Remote IP Range
Enable: Check the box to enable this rule.
Remote IP Start: Enter the starting IP address to apply the rule to.
Remote IP End: Enter the ending IP address to apply the rule to.
ADD INBOUND FILTER RULE