D-Link DIR-825+ - Page 53

49D-Link DIR-825+ User Manual
Section 3 - Conguration
VLAN:
Enter the vlan information provided by your Internet Service Provider (ISP).
 Disable  Enable
Internet Vlan ID : 500 (2-4094)
IPTV Vlan ID : 600 (2-4094)
VoIP Vlan ID : 400 (2-4094)
Choose which vlan that router ports belong to.
LAN port1 :
Internet
▼
LAN port2 :
Internet
▼
LAN port3 :
Internet
▼
LAN port4 :
Internet
▼
Wireless 2.4G :
Internet
▼
Wireless 5G :
Internet
▼
INTERNET CONNECTION TYPE
Choose the mode to be used by the router to connect to the Internet.
My Internet Connection is :
DS-Lite
▼
Save Settings Don’t Save Settings
WANINTERNET
DIR-825+
SETUP
WAN
Use this section to congure your Internet Connection type. There are several connection types to choose from: Static IP, DHCP, PPPoE,
PPTP, L2TP, DS-Lite and Russia PPPOE. If you are unsure of your connection method, please contact your Internet Service Provider.
Note : If using the PPPoE option, you will need to remove or disable any PPPoE client software on your computers.
Save Settings Don’t Save Settings
VLAN
The VLAN (Virtual Local Area Network) allows you to prioritize some devices over others
by given them their own dedicated network. In order to utilize these features, you must
know the proper 802.1Q VLAN tags. The VLAN IDs are provided by your ISP. To enable this
functionality, dene the VLAN IDs, apply the VLAN to the desired interface, and connect
your devices. Be sure the information matches your ISP’s settings.
VLAN: Select Enable if your ISP uses VLAN.
Internet Vlan ID : Enter a VLAN ID from 2-4094 provided by your ISP for Internet Access.
IPTV Vlan ID : Enter a VLAN ID from 2-4094 provided by your ISP for IPTV (Internet
Protocol Television).
VoIP Vlan ID : Enter a VLAN ID from 2-4094 provided by your ISP for VoIP (Voice
over IP).
LAN port1 : Select which VLAN devices attached to this port will use.
LAN port2 : Select which VLAN devices attached to this port will use.
LAN port3 : Select which VLAN devices attached to this port will use.
LAN port4 : Select which VLAN devices attached to this port will use.
Wireless 2.4G : Select which VLAN devices attached via 2.4 GHz Wireless will use.
Wireless 5G : Select which VLAN devices attached via 5 GHz Wireless will use.
When you have nished conguring your Internet connection, click
the Save Settings button.