3 Parallel Port Multiprotocol Fast Ethernet Print Server User’s Guide
Unpacking and Installation 9
off on/steady off LPT2 error
off on/steady on/steady LAN Controller error
off on/steady flashing LAN Memory error
off flashing off
Parallel-2 Controller error
off flashing on/steady
EEPROM error
off flashing flashing Flash Protected
on/steady off off LPT1 error
on/steady off on/steady Timer INT error
on/steady off flashing LAN IO Base error
on/steady on/steady off RAM error
flashing off off Parallel-1 Controller error
flashing flashing off Flash erase/program error
flashing flashing flashing Need to reload firmware
Testing Your Print Server
The PS Admin software includes a Print Test function for
confirmation of printer cable connections and functions. That
operational test can be completed after you have installed the PS
Admin software, and have configured your Print Server and its ports.
See the Testing Your Print Server section of the PS Admin User’s
Guide.
To Next Page
Loading...
