1.6 LED introduction
Table 1 Programmable key LEDs for BLF
The object is in idle status.
The object is failed/ No subscribe
Table 2 Programmable key LEDs for Presence
The object is failed/ No subscribe
There is an incoming call to the account
The call is on hold/ Registration is unsuccessful
The line is unapplied or idle
Table 4 Programmable key LEDs for line
There is an incoming call to the account
Registration is unsuccessful
The line is not unapplied or idle
Table 5 Programmable key LEDs for MWI
There are new voice mails
There is no new voice mail
Table 6 Power Indication LED
There is an incoming call.
To Next Page
Loading...
