D-Link DPH-400G - Sip Config

SIP Config
Field name
explanation
SIP Line
Choose line to set info about SIP, there are 5 lines to choose. You can switch
by【Load】button.
Basic Settings
Status
Shows if the phone has been registered the SIP
server or not; or so, show Unapplied.
Server Address
Input your SIP server address.
Server Port
Set your SIP server port.
Authentication User
Input your SIP register account name.
Authentication
Password
Input your SIP register password.
SIP User
Input the phone number assigned by your VoIP
service provider. Phone will not register if there is
no phone number configured.
Display Name
Set the display name.
Proxy Server Address
Set proxy server IP address(Usually, Register SIP
Server configuration is the same as Proxy SIP
Server. But if your VoIP service provider give
different configurations between Register SIP Server
and Proxy SIP Server, you need make different
settings).
Proxy Server Port
Set your Proxy SIP server port.
Proxy User
Input your Proxy SIP server account.
Proxy Password
Input your Proxy SIP server password.
Domain Realm
Set the sip domain if needed, otherwise this VoIP
phone will use the Register server address as sip
domain automatically. (Usually it is same with
registered server and proxy server IP address).
Backup Server
Address
Input the Backup Server Address, if the primary
server is unavailable , then the phone will enable the
Backup Server Address
Backup Server Port
Specify the Backup Server Port