D-Link DPH-400G - Page 48

Server Name
Named the server
Enable Registration
Start to register or not by selecting it or not.
Codecs Settings
Disable
Codecs/Enable
Codecs
Use the navigation keys to highlight the desired one
in the Enable/Disable Codecs list, and press the
desired to move to the other list.
Advanced SIP
Setting
Forward Type
Select call forward mode, the default is Off
Off：Close down calling forward
Busy：If the phone is busy, incoming calls will be
forwarded to the appointed phone.
No answer： If there is no answer, incoming calls
will be forwarded to the appointed phone after a
specific.
Always：Incoming calls will be forwarded to the
appoint phone immediately.
The phone will prompt the incoming while doing
forward.
Forward Number
Specify the number you want to forward.
No Answer Forward
Wait Time
Specify the No Answer Forward Delay Time，if the
Forward Type is No answer, incoming calls will be
forwarded after the no answer forward wait time
Transfer Timeout
For the phone supports the transfer of certain special
features server, set interval time between sending
“bye” and hanging up after the phone transfers a
call.
Enable Hot Line
Specify Hot Line by selecting it
Hot Line Number
Specify Hot Line Number, the phone dial the hot
line number automatically at hands-free mode or
handset mode after warm line time
Warm Line Wait
Time
Specify the Warm Line Time
BLF Server
Ordinary BLF application is that the phone send
subscription package to the registered server, if your
server does not support subscription package, please
input the BLF server so that it can separate register
server and BLF server.
SIP Encryption
Enable/Disable SIP Encryption.