D-Link DPH-400G - Page 23

 MWI
 DND (Do Not Disable)
 Hold
 Transfer
 Phone Book
 Redial
 Pick up
 Join
 Auto Redial On
 Auto Redial Off
 Call Forwarding
 History
 Flash
 Memo
 Headset
 Release: Press the key you can end the call.
 Lock: Press the key you can lock the keyboard.
 SMS
 Call Back
 Power Light
 Hide DTMF
 Prefix
 Hot Desking: Pressing the key, you can clear all sip information and register
yourself sip information
 Agent
4. Set the type as Dtmf
You can configure the key as Dtmf. This key function allows you to easily dial
or edit dial number.
5. Set the type as Remote
You need to match a XML Phonebook address, pressing the button you can
directly access the corresponding remote phonebook.
6. Set the type as BLF List Key
It needs the cooperation with the Broadsoft server. The traditional BLF is
that every number will need to be subscribed, so if the numbers that
subscribed is so many that it will cause to obstruction. However, BLF List
Key will put the numbers that needed to be subscribed in a group, and the
phone use the URL of the group to subscribe and analyze the specific
information of each number such as number, name, state and so on according
to the notifications from the server. Then set the idle Memory key as BLF
List Key, later if the state of an object changes, the corresponding LED will
change.
7. set the type as Multicast
Set the multicast address and audio code, press this key to initiate the
multicast.