DSL-2520U ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Installation and Connection
From the system statistics page you can proceed to the page for upgrading the router's firmware,
contact the technical support group, and proceed to the settings of the local interface.
To upgrade the firmware of the router, left-click the current firmware version (the right column of
the Firmware version line). After clicking the line, the System / Firmware upgrade page
opens (see the Firmware Upgrade section, page 81).
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the router's local interface parameters, left-click the IP or MAC address of the local interface
(the right column of the LAN IP line or LAN MAC line correspondingly). After clicking the line,
the page for editing the LAN interface opens (see the LAN section, page 53).
The web-based interface of the router is multilingual. Select a needed language from the menu
displayed when the mouse pointer is over the Language caption. You can change the language of
the web-based interface in any menu item.
Figure 15. Changing the language of the web-based interface.
After selecting the language, the notification on unsaved changes will be displayed. Click the Save
button to save the current language of the web-based interface as the default language.
Page 24 of 83
To Next Page
Loading...
Need help?
Data Transfer Rates
