Appendix A – Troubleshooting
D-Link DSL-2730U User Manual
32
WAN Service Configuration – PPPoE
Default gateway interface list can have multiple WAN interfaces served as
system default gateways but only one will be used according to the priority
with the first being the higest and the last one the lowest priority if the
WAN interface is connected. Priority order can be changed by removing
all and adding them back in again. Click the Next button to continue.
WAN Service Configuration – PPPoE
Select DNS Server Interface from available WAN interfaces OR enter
static DNS server IP addresses for the system. In ATM mode, if only a
single PVC with IPoA or static IPoE protocol is configured, Static DNS
server IP addresses must be entered.
DNS Server Interfaces can have multiple WAN interfaces served as
system dns servers but only one will be used according to the priority with
the first being the higest and the last one the lowest priority if the WAN
interface is connected. Priority order can be changed by removing all and
adding them back in again. Click the Next button to continue
To Next Page
Loading...
