D-Link DSL-2740B User Manual

Section 3 - Configuration
D-Link DSL-2740B User Manual
73
Port Mapping
Port Mapping supports multiple ports to PVC
and bridging groups. Each group will perform as
an independent network. To support this feature,
you must create mapping groups with
appropriate LAN and WAN interfaces. All
interfaces, by default are grouped to Default
Group.
Check the Enable virtual ports on box to
separate 4 LAN ports, otherwise they are
grouped as one interface: eth0.
Note: Only interfaces in the Default Group
can access router’s web page.
Click the Add button to set Port Mapping setting.

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole