D-Link DSL-2740B User Manual

45
Notice Wlreless Bridge function is available only when 802.11n is disabled. Please go to
ADVANCED WLAN page to disable 802.11n before configuring Wireless Bridge.
1. Select AP Mode from the drop-down list.
2. Select Enabled in Bridge Restrict drop-down list and enter the MAC address of the AP which to be bridged.
Or,
3. Select Enabled(Scan) in Bridge Restrict drop-down list and the Router starts to search and displays available
APs. Click the specific AP check box.
4. Click the Save Settings button to apply settings.
WLAN BRIDGE Window

D-Link DSL-2740B Specifications

ADSL Standards

downstream data rate	up to 8 Mbps
upstream data rate	up to 1 Mbps
G.lite downstream data rate	up to 1.5 Mbps
G.lite upstream data rate	up to 512 Kbps
G.dmt.bis downstream data rate	up to 12 Mbps
G.dmt.bis upstream data rate	up to 12 Mbps

ADSL2 Standards

full rate downstream data rate	up to 24 Mbps
full rate upstream data rate	up to 1 Mbps

Wireless LAN

wireless speed	up to 300 Mbps
frequency range	2.4 GHz to 2.484 GHz
antennas	2 non-detachable dipole