DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Advanced Settings
Maximum number of
connections
Available on the PPTP tab.
The maximum number of devices allowed to connect to the PPTP
server.
Port
Available on the L2TP tab.
The port of L2TP server. By default, the value 1701 is specified.
MTU
The maximum size of units transmitted by the interface.
Enable debug mode
Move the switch to the right if you want to log all data on this VPN
server debugging.
DNS
Obtain DNS server
addresses
automatically
Move the switch to the right to let VPN server’s clients obtain DNS
server addresses of the WAN connection which is selected from the
Interface list. Upon that the Primary DNS and Secondary DNS
fields are not available for editing.
Primary DNS /
Secondary DNS
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
If you want to specify the list of accounts to provide access to this server, click the ADD ( )
button in the Users List section.
Figure 133. A window for adding a user.
In the opened window, you can specify the following parameters:
Parameter Description
User
Select a user account to allow access.
Page 168 of 358
To Next Page
Loading...
