DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection
On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 70. The page for creating a new Static IPv4 connection. The General Settings section.
Parameter Description
General Settings
Interface
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the WAN
value or the value corresponding to the LAN port specified as the
WAN port.
In order to create an VDSL WAN connection, select the value
corresponding to the existing interface or the Add new PTM value
for creating a new interface at the physical layer.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the Add new ATM PVC
value for creating a new interface at the physical layer.
Connection name
A name for the connection for easier identification.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Page 89 of 358
To Next Page
Loading...
