DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Connections Setup
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the Connections Setup / WAN page, you can create and edit connections used by the router.
By default, Ethernet, VDSL, and ADSL connections of the Dynamic IPv4 type are configured in
the system. They are assigned to the WAN and DSL ports of the router correspondingly. You can
edit these connections or delete them.
!
Please reboot the router after creating, editing, or removing an ADSL WAN connection.
!
Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the
WAN port (see the WAN Remapping section, page 236 ).
Figure 68. The Connections Setup / WAN page. The advanced mode.
Page 86 of 358
To Next Page
Loading...
