DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
VoIP
In this menu you can configure all parameters essential for VoIP via SIP and specify all needed
settings for the phones connected to the router.
Home
On the VoIP / Home page you can enable VoIP and manage profiles.
Figure 198. The VoIP / Home page.
To enable VoIP, move the Enable VoIP switch to the right. You can specify the following
parameters:
Parameter Description
Interface type
The type of network interface for VoIP. Select the needed value from
the drop-down list.
• Connection: The selected WAN connection serves as the
interface for VoIP.
• WAN group: A WAN group is used as the interface for
VoIP. The router chooses an interface from the group of
interfaces based on the routing table.
Page 261 of 358
To Next Page
Loading...
