DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
You can specify the following parameters:
Parameter Description
Transmission
Enable
Move the switch to the right to activate the Transmission client.
Main Settings
Port
The router's port which will be used by the Transmission client.
Path
Locate data of the Transmission client. To do this, click the Search
icon ( ), select the needed value, and click the SELECT button.
Directory
The folder on the USB storage where data of the Transmission client
will be stored.
Enable download queue
Move the switch to the right if you want to limit the number of
simultaneous downloads. Upon that the Download queue size
field will be displayed.
Move the switch to the left not to limit the number of simultaneous
downloads.
Download queue size
The maximum number of simultaneous downloads. By default, the
value 1 is specified.
Peer limit
The maximum number of the service users from which you can
download files.
Enable download speed
limit
Move the switch to the right to limit the maximum file download
speed. In the Download speed limit field displayed, specify the
maximum value of speed (KBps).
Move the switch to the left not to limit the maximum download
speed.
Use uTP
Move the switch to the right to enable μTP (Micro Transport
Protocol, a transport protocol for file sharing). Such a setting can
increase the load on the router.
Move the switch to the left to disable μTP.
Web-based interface
port
The port on which the web-based interface of the Transmission
client is available.
Authorization
Enable
Move the switch to the right if you want the Transmission client to
request for username and password when accessing its web-based
interface. Then fill in the Username and Password fields.
Page 220 of 358
To Next Page
Loading...
