DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Source port
Select the mode for each port traffic from which should be copied to
the destination port.
• Both: Copy incoming and outgoing traffic from the source
port to the destination port.
• TX: Copy outgoing traffic from the source port to the
destination port.
• RX: Copy incoming traffic from the source port to the
destination port.
Leave the None value for ports from which it is not required to
copy traffic.
After specifying the needed parameters, click the APPLY button.
To disable the function of port mirroring, click the DISABLE button.
Page 253 of 358
To Next Page
Loading...
