DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
In the Dialplan Settings section, you can configure the dial plan for VoIP. To do this, move the
Use dialplan switch to the right and in the Dialplan field displayed, specify the needed rule. You
can specify several rules separated by the character | (vertical bar). You can use digits (0-9), the
characters * (asterisk) and # (pound), and the following characters:
Parameter Description
[]
Digits and/or the characters * and # within square brackets specify a
range of values for a certain position in the number.
X
Any digit, the character * or #.
.
Any number of repetitions (including none) of the previous digit or
character.
<>
Angle brackets containing digits separated by : (colon) allow to
substitute the digit after the colon for the digit before the colon.
N
Any digit from 0 to 9.
,
A dial tone after the previous position.
Page 292 of 358
To Next Page
Loading...
