DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Simplified mode
Schedule name
Specify a schedule name for easier identification. You can specify
any name.
Interval of execution
Specify the time period for performing a task.
Every minute.
Every hour: When this value is selected, the Time field is
displayed in the section.
Every day: When this value is selected, the Time field is displayed
in the section.
Every week: When this value is selected, the names of days of the
week and the Time field are displayed in the section.
Every month: When this value is selected, the Day of month and
Time fields are displayed in the section.
Duration
Specify the interval during which the task will be performing.
Time
Specify the time when the task should start running.
Days of week
Select a day or days of the week when the task will be performing.
To do this, select the checkbox located to the left of the relevant
value.
Day of month
Specify a day of the month. You can specify one value or several
values separated by a comma.
In the advanced mode, you can specify more parameters for the schedule using a cron expression.
To do this, select the Advanced mode value from the Mode drop-down list and specify the
needed values in the fields displayed. You can specify one value or several values separated by a
comma. You can use the character * (asterisk) to specify the entire range of possible values. Upon
that the Schedule field will be filled in automatically. In the Schedule name field, specify a
schedule name for easier identification (you can specify any name).
You can also use the calendar mode to configure the schedule. To do this, select the Calendar
mode value from the Mode drop-down list. In the Schedule name field, specify a schedule
name for easier identification (you can specify any name). In the table, select cells corresponding to
needed hours and days of the week. To deselect a cell, left-click it once again. To deselect all cells
and select others, click the RESET button and select new cells.
Click the SAVE button.
To edit a schedule, in the All Tasks section, select the relevant line in the table. In the opened
window, change the needed parameters and click the SAVE button.
Page 329 of 358
To Next Page
Loading...
