DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
In order to connect your device to a private Ethernet line, on the Device mode page, from the
Connection method list, select the Ethernet (WAN) value. Then from the Work mode list,
select the Router value. In this mode you can configure a WAN connection, set your own settings
for the wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or
VoIP phone, and set your own password for access to the web-based interface of the device. If you
want to use one of the LAN ports to connect your device to a private Ethernet line, select the
Ethernet (LAN) value.
Figure 35. Selecting an operation mode. The Ethernet (WAN) connection method.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Mobile Internet value. In this mode you can
configure a 3G/LTE WAN connection, set your own settings for the wireless network in the 2.4GHz
and 5GHz bands, and set your own password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The Mobile Internet connection method.
Page 52 of 358
To Next Page
Loading...
