26D-Link DWA-172 User Manual
Section 4 - Wireless Security
Configure WPA/WPA2 Passphrase
Using Windows Vista
®
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect.
1. Open the Windows Vista
®
Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select Connect to a network.
To Next Page
Loading...
