Access Point CLI Commands
19
SYSTEM MANAGEMENT
Table 11 shows the commands you use to manage the configuration file and firmware on the AP.
Table 11: System Management
Action Command
Restore the factory default settings factory-reset
Save the configuration to a backup file config download <url>
Example:
config download tftp://1.2.3.4/defaultcfg.xml
Restore the configuration from a previously saved
file
config upload <url>
Example:
config upload tftp://1.2.3.4/defaultcfg.xml
Reboot the system reboot
Upgrade the firmware (requires a reboot) firmware-upgrade <url>
Example:
firmware-upgrade tftp://1.2.3.4/upgrade.tar
firmware-upgrade file://1.2.3.4/tmp/upgrade.tar
Review Copy
To Next Page
Loading...
