D-Link DWM-312W - Default Settings

DWM-312W Quick Installation Guide
Default Settings
Domain name of device
dlinkrouter.local.
IP address of device
192.168.0.1
Username (login)
admin
Password
admin
Name of wireless network (SSID)
DWM-312W
Network key (PSK password)
see WPS PIN on the barcode
label on the bottom panel of
the device
!
Router DWM-312W with default settings cannot connect to the
Internet. To get started, please set your own password for access to the
web-based interface and change the WLAN name (SSID); then, if
needed, configure other settings recommended by your ISP.
3