D-Link DWM-312W

DWM-312W Quick Installation Guide
2. If a particular MAC address was registered by your ISP upon concluding
the agreement, from the MAC address assignment method drop-
down list (available for the Wired connection method only), select the
Manual value and enter this address in the MAC address field. Choose
the Clone MAC address of your device value to place the MAC
address of your network interface card in the field, or leave the Default
MAC address value to place the router’s WAN interface MAC address
in the field.
3. If the Internet access is provided via a VLAN channel, select the Use
VLAN checkbox and fill in the VLAN ID field (available for the Wired
connection method only).
4. Click the NEXT button.
31