20D-Link DWR-925 User Manual
Section 3 - Conguration
Set the maximum time your connection can be idle before
disconnecting. Set it to 0 or choose Auto in Reconnect Mode
to disable this feature.
Fill in if provided by your ISP. If not, keep the default value
(optional).
Fill in if provided by your ISP. If not, keep the default value
(optional).
Select Disable or Use Ping depending on the settings
required by your ISP. If you select Use Ping, set the ping
interval and the IP address to ping.
Activate this feature to use the Ethernet WAN port as an
additional LAN port.
Activate this feature to disable NAT through this router.
Maximum Idle Time:
Primary DNS Server:
Secondary DNS Server:
Keep Alive:
Bridge Ethernet Ports:
NAT disable:
To Next Page
Loading...
