D-Link DWR-925 - LAN Ipv6 Address Settings

34D-Link DWR-925 User Manual
Section 3 - Conguration
LAN IPv6 Address Settings
Tick to Enable IPv6 tunneling.
Select LAN IPv6 Address Settings from the drop-down menu.
Enter the primary and secondary DNS addresses here.
Tick to enable DHCP-PD.
Enter the LAN IPv6 address.
Displays the LAN IPv6 link-local address.
Tick to enable the autoconguration feature.
Select SLAAC + Stateless DHCPv6 or Stateful (DHCPv6).
Enter the IPv6 address lifetime (in seconds).
Tick to enable DS-Lite.
Tick DS-Lite DHCPv6 Option or Manual Conguration.
Enter the AFTR IPv6 address supplied by your service provider.
IPv6:
IPv6 Connection:
Primary/Secondary
DNS Addresses:
Enable DHCP-PD:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable
Autoconguration:
Autoconguration Type:
Router Advertisement
Lifetime:
DS-Lite Enable:
DS-Lite Conguration:
AFTR IPv6 Address: