D-Link DWR-925 - System Tools and Management

59D-Link DWR-925 User Manual
Section 3 - Conguration
ADMINISTRATOR
Enter and conrm the password that the admin account will
use to access the router’s management interface.
REMOTE MANAGEMENT
Tick this check box to enable remote management. Remote
management allows the DWR-925 to be congured over the
Internet through a web browser. A username and password
will still be required to access the web-management interface.
Enter the Internet IP address of the PC that has access to the
broadband router. If you enter an asterisk (*) in this eld, then
anyone will be able to access the router. Adding an asterisk
(*) into this eld could present a security risk and is not
recommended.
This is the port number used to access the router. 8080 is the
port usually used for the web-management interface.
Admin
The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access while users
only have read-only access. Only the admin has the ability to change both admin and user account passwords. After modifying any settings, click
Save Settings to save your changes.
New/Conrm Password:
Enable Remote
Management:
IP Allowed to Access:
Port:
Tools