D-Link DWR-925 - 6 Rd

38D-Link DWR-925 User Manual
Section 3 - Conguration
6rd
Tick to Enable IPv6 tunneling.
Select 6rd from the drop-down menu.
Enter the IPv4 (remote) address here.
Enter the mask length of the IPv4 address.
Enter the remote prex of the IPv4 address.
Enter the length of the remote prex.
Enter the DNS server addresses.
Displays the LAN (local) IPv6 address for the router.
Displays the router’s LAN link-local address.
Tick to enable the autoconguration feature.
Select Stateful (DHCPv6) or SLAAC+Stateless
DHCPv6 autoconguration.
Enter the IPv6 address lifetime (in seconds).
IPv6:
IPv6 Connection:
Remote IPv4 Address:
IPv4 Mask Length:
Remote Prex:
Prex Length:
Primary/Secondary DNS
Addresses:
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
Enable
Autoconguration:
Autoconguration Type:
Router Advertisement
Lifetime: