D-Link DWR-925 - MAC Address Filter

49D-Link DWR-925 User Manual
Section 3 - Conguration
MAC Address Filter
MAC FILTERING SETTINGS
Tick this box to enable MAC ltering.
Tick the box to allow wireless and wired clients with C selected
to connect to this device. You can also select to allow or deny
connections from unspecied MAC addresses.
Tick the box to allow wireless clients with A selected can
associate to the wireless LAN. You can also select to allow or
deny connections from unspecied MAC addresses.
Select a DHCP client from the drop-down list and lick Copy to
and select an ID to apply the lter.
MAC FILTERING RULES
This identies the rule.
Specify the MAC address of the computer to be ltered.
If this box is ticked, the rule will follow the connection control
setting specied in MAC ltering settings specied above.
If this box is ticked, the rule will follow the association control
setting specied in MAC ltering settings specied above.
Click Next page to see more lters.
MAC Address Control:
Connection Control:
Association Control:
DHCP clients:
ID:
MAC Address:
C:
A:
The MAC (Media Access Controller) address lter option is used to control network access based on the MAC address of the network adapter. A
MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be congured to allow or deny network/Internet
access. After modifying any settings, click Save Settings to save your changes.