D-Link DWR-925 - Add Wireless Device with Wps

24D-Link DWR-925 User Manual
Section 3 - Conguration
Add Wireless Device with WPS
Enable the Wi-Fi Protected Setup feature.
A PIN is a unique number that can be used to add the router to
an existing network or to create a new network. Pushing this
button will generate a new, random PIN.
Choose either Enrollee or Registrar from the drop-down menu.
Press Set to switch between Congured and Uncongured
states.
Tick this box to use the Push Button method only.
Select Push Button or PIN method from the drop-down menu.
For the Push Button method, to add a wireless client simply push
the WPS button on the device and click Trigger. In order to use
the PIN method you must know the wireless client’s 8 digit PIN
and click Trigger.
Note: Once you click Trigger, you will have a 120 second
time limit to apply the settings to your wireless client(s) and
successfully establish a connection.
Indicates whether WPS is In Use or Not In Use. The Trigger
button will activate WPS for up to 120 seconds.
WPS:
AP PIN:
Cong Mode:
Cong Status:
Disable WPS-PIN
Method:
Cong Method:
WPS Status:
Wi-Fi Protected Setup (WPS) is a simplied method for securing your wireless network during the initial setup as well as the “Add New Device”
processes. The Wi-Fi Alliance (WFA) has certied it across dierent products as well as manufacturers. The process is as easy as pressing a button for
the Push-button method or entering the 8-digit code for the PIN method. Using WPS gets you connected quickly and easily, with the most secure
wireless encryption method, WPA2.