DWR-953 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports
User Manual
Configuring via Web-based Interface
Parameter Description
Select band
automatically
If the switch is moved to the right, the frequency band configuration
is performed automatically.
If you need to configure the frequency band manually, move the
switch to the left. Upon that available bands for the type of network
selected from the Mode list are displayed on the page. To disable
the needed bands, move relevant switches to the left. Contact your
operator to clarify the information on used bands.
The switch is displayed after assigning the connection to the
connected SIM card.
APN
An access point name.
Without authorization
Move the switch to the right if your operator does not require
authorization.
Authentication protocol Select a required authentication method from the drop-down list.
Username A username (login) to connect to the network of the operator.
Password
A password to connect to the network of the operator. Click the
Show icon ( ) to display the entered password.
Type
An IP version which will be used by this connection. Select the
IPv4, IPv6, or Dual value from the drop-down list.
Figure 88. The page for creating a new Mobile Internet connection. The IPv4 section.
Parameter Description
IPv4 (for the Dual and IPv4 types)
Obtain DNS server
addresses
automatically
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Primary DNS /
Secondary DNS
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 101 of 264
To Next Page
Loading...
