D-Link DWR-M960 - Site Survey

User Manual of DWR-M960
-62-
Static DHCP
This page allows you reserve IP addresses, and assign the same
IP address to the network device with the specified MAC address
any time it requests an IP address. This is almost the same as
when a device has a static IP address except that the device must
still request an IP address from the DHCP server.
Domain Name
Set the domain name of the server.
802.1d
Spanning Tree
Enable or disable spanning tree function.
5.2.5.2. Static DHCP
If user want to reserve specific IP for some device, you can bind the mac and the IP in this page.
Figure 5-2-23 Static DHCP
5.2.5.3. IPv6
This page shows the information of IPv6.
Figure 5-2-24 IPv6