D-Link DWS-3160-24TC - Page 419

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
414
Figure 3-24 Global Distributed Tunneling window
The fields that can be configured are described below:
Parameter Description
Distributed Tunnel
Clients
Enter the maximum number of distributed tunneling clients that can roam away
from the Home AP at the same time.
Distributed Tunnel Idle
Timeout
Enter the time in seconds of no activity by the client before the tunnel to that client
is terminated, and the client is forced to change its IP address.
Distributed Tunnel
Timeout
Enter the time in seconds before the tunnel to the roamed client is terminated, and
the client is forced to change its IP address.
Distributed Tunnel Max
Multicast Replications
Allowed
Enter the maximum number of tunnels to which a multicast frame is copied on the
Home AP.
Click the Apply button to accept the changes made.
Networks
This window is used to display all the wireless networks configured on the switch.
To view this window, click Administration > Advanced Configuration > Networks as shown below:
Figure 3-25 Networks window