D-Link DWS-3160-24TC - Page 420

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
415
The fields that can be configured are described below:
Parameter Description
Network Name
Enter the SSID.
Click the Add button to add a new entry based on the information entered.
Tick the check box of a specific SSID and click the Delete button to remove the entry.
Click the Refresh button to update the information.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the ID or SSID hyperlink, the following page will appear:
Figure 3-26 Networks – Edit window
The fields that can be configured or displayed are described below:
Parameter Description
SSID
Enter Service Set Identifier (SSID) of the network, which is an alphanumeric key
that uniquely identifies a wireless local area network.
Hide SSID
Tick the check box to hide the SSID broadcast to discourage stations from
automatically discovering the access point.
Deny Broadcast
Tick the check box to prohibit the AP from responding to client probe requests
VLAN
Enter a VLAN ID.
MAC Authentication Click Local or RADIUS to enable MAC Authentication. The MAC address of the
client must be configured at the local switch or the external RADIUS server.
Redirect
Select the HTTP radio button to redirect wireless clients to a custom Web page.