D-Link GLB-802C User Manual

CHAPTER-3
D-Link GLB-802C ADSL2+ Router User Manual 15
3.3.3 LAN CONFIGURATION
This page displays the IP address and subnet mask details. of the router.The default IP address and subnet
mask of the router is suitable for most networks.
z Conf. LAN IP Address: The IP address, i.e. the management IP address of the Ethernet port of the
router . The default is 192.168.1.1.
z USB IP Address: The IP address, i.e. the management IP address of the USB port of the router. The
default is 192.168.1.2.
z Conf. LAN Network Mask: The subnet mask of the IP address. The default value is 255.255.255.0.
To change the LAN IP address of Ethernet, go to LAN, click on LAN Config, under “LAN configuration”,
enter the new IP address and click on “Submit”. To change the IP address of USB interface, enter the new
IP address under “USB configuration”.
On clicking on “Submit”, a warning as shown below would be received .Click on “Submit” to apply the
settings.

D-Link GLB-802C Specifications

General

Brand	D-Link
Model	GLB-802C
Category	Network Router
Language	English