CHAPTER-3
D-Link GLB-802C ADSL2+ Router User Manual 35
To add hosts to Communities
1. Click “Add Host”
2. Enter the IP address of the host computer and click Submit.
The newly added hosts have access to the MIB with the privilege level associated with the community.
To view all hosts and the communities they are assigned, click “View hosts” on the main SNMP
configuration page. To view statistics relating to SNMP packets, click “Global Stats” on the main SNMP
configuration page.
Notes: SNMP protocol version just supports SNMPv1.
To Next Page
Loading...
Need help?
General
