D-Link GO-RT-N150 - System Settings

37D-Link GO-RT-N150 User Manual
Section 3 - Conguration
Use this option to save the current router conguration
settings to a le on the hard disk of the computer you
are using. First, click the Save button. You will then
see a le dialog, where you can select a location and
le name for the settings.
Use this option to load previously saved router
conguration settings. First, use the Browse control
to nd a previously save le of conguration settings.
Then, click the Load button to transfer those settings
to the router.
This option will restore all conguration settings back
to the settings that were in effect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that you
have created. If you want to save the current router
conguration settings, use the Save button above.
Click to reboot the router.
This is to restore the device back to English version only.
Remove other languages installed for the system web
pages.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
Clear Language
Pack:
System Settings