D-Link GO-RT-N150 - Manual Wireless Network Setup

20D-Link GO-RT-N150 User Manual
Section 3 - Conguration
Manual Wireless Network Setup
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. Click Add New to create your
own time schedule to enable the wireless function.
Service Set Identier (SSID) is the name of your
wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
Select one of the following:
02.11n Only - Select if you are using both 802.11b
and 802.11g wireless clients.
802.11 Mixed(g/b)- Select if you are using both
802.11b and 802.11g wireless clients.
802.11 Mixed(n/g/b) - Select if you are using a mix of
802.11n, 11g, and 11b wireless clients.
The Auto Channel Scan setting can be selected to allow the GO-RT-N150 to choose the channel with the least amount
of interference.
Indicates the channel setting for the GO-RT-N150. By default the channel is set to 6. The Channel can be changed to t the
channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan,
this option will be greyed out.
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Enabling Hidden Mode is another way to secure your network. With this option enabled, no wireless clients will
be able to see your wireless network when they perform a scan to see what’s available. In order for your wireless
devices to connect to your router, you will need to manually enter the Wireless Network Name on each device.
Refer to Section 4- Wireless security for more information regarding wireless security.
Enable Wireless:
Wireless Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Enable Hidden
Wireless:
Transmission
Rate:
Wireless Security: