D-Link IRX1860A1 - Page 46

41D-Link DIR-X1860 User Manual
Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable Automatic
IPv6 Address
Assignment
Enable or disable the Automatic IPv6 Address Assignment
feature.
Enable Automatic
DHCP
-PD in LAN
Enable or disable DHCP-PD for other IPv6 routers connected
to the LAN interface.
Autoconfiguration
Type
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If you selected
SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Advertisement
Lifetime
Enter the router advertisement lifetime (in minutes).
IPv6 Address
Range (End)
Enter the ending IPv6 address for the DHCP server’s IPv6
assignment.
If you selected
Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Range (Start)
Enter the starting IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address
Range (End)
Enter the ending IPv6 address for the DHCP server’s IPv6
assignment.