77D-Link DIR-X1860 User Manual
Section 3 - Configuration
Static Route - IPv4
In the Features menu on the bar at the top of the page, click Static Route to define custom routes, controlling how data
traffic is moved around your network.
To configure the Static Route IPv6 settings, click the IPv6 link. Refer to Static Route - IPv6 on page 78
Click Save at any time to save the changes you have made on this page.
If you wish to remove a route, click on the trash can icon in the Delete column. If you wish
to edit a route, click on the pencil icon in the Edit column. If you wish to create a new route,
click the Add Route button.
Add Rule, the following options will appear:
Name Enter a name for the rule.
Destination Network Enter the IP address of packets that will take this route.
Mask Enter the subnet mask of the route.
Gateway Enter your next hop gateway to be taken when this route is
used
.
Metric Enter a route metric value ranging from 0 to 15. This value
indicates the cost of using this route.
Interface Select the interface that the IP packet must use to transit out
of the router when this route is used.
To Next Page
Loading...
Need help?
General
