D-Link IRX1860A1 - Page 51

46D-Link DIR-X1860 User Manual
Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable Automatic
IPv6 Address
Assignment
Enable or disable the Automatic IPv6 Address Assignment
feature.
If
Enable DHCP-PD is disabled in the previous LAN IPv6 Address Settings:
Autoconfiguration
Type
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
DHCPv6.
If you selected
SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Advertisement
Lifetime
Enter the router advertisement lifetime (in minutes).
If you selected
Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Range (Start)
Enter the starting IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address
R
ange (End)
Enter the ending IPv6 address for the DHCP server’s IPv6
assignment.
IPv6 Address Lifetime Enter the IPv6 address lifetime (in minutes).