D-Link M15 User Manual

64D-Link M15 User Manual
Section 3 - Conguration
Static Routes
IPv4
If you click on Edit or Add Route, the following options will appear:
Name Enter a name for the route.
Destination
Network
Enter the destination IP address of the subnetwork.
Mask Enter the subnet mask of the destination address.
Gateway Enter the IP address of the next hop, which is the gateway to the
remote network.
Metric The route metric is a value from 1 to 16 that indicates the cost (or
number of hops) of using this route. A value of 1 is the lowest cost
and 16 is the highest cost.
Interface Select the interface that the IP packet must use to transit out of the
device when this route is used.
Click Apply when you are done.
Go to Features > Static Routes to dene custom routes to control how traf-
c moves around your network.
To congure the Static Route IPv6 settings, click the IPv6 tab. Refer to IPv6
on page 65.
If you wish to remove a rule, click
in the Delete column. If you wish to edit a
rule, click
in the Edit column. If you wish to create a new rule, click the Add
Rule button.

D-Link M15 Specifications

General

Security	WPA3
MU-MIMO	Yes
Beamforming	Yes
Product Type	Mesh Wi-Fi System
Model	M15
Parental Controls	Yes
Guest Network	Yes
Mobile App	D-Link Wi-Fi App
Voice Control	Amazon Alexa, Google Assistant
Frequency Bands	Dual-band
Wi-Fi Speed	AX1500
Security Protocols	WPA3, WPA2, WPA
Maximum Data Rate	1500 Mbps
Ethernet Ports (Per Unit)	1 x Gigabit WAN port, 2 x Gigabit LAN ports